How to Wear Torc Bracelets Without Damaging Them

A cuff/torc is meant to be slid on, not “opened and closed” every time. Repeatedly bending the gap weakens the metal and can eventually cause cracking or breakage. Some cuffs are also built so rigid that forcing them open is simply not realistic.

If you are not sure how to measure your bracelet size - explore our size guide

Here is a step-by-step guide on how to wear bracelets and cuff bangles:

1. Set the opening once

Turn your hand slightly sideways.
Adjust the cuff gap so it just clears the narrowest part of your wrist (usually near the side of the wrist/just past the wrist bone).
This is a one-time adjustment. After that, avoid bending it again.

2. Slide it on through the narrowest point

Keep your wrist turned sideways.
Guide the opening onto the narrowest part of your wrist and slide slowly.
Advanced method (optional): press one end lightly into the softer underside of your wrist while guiding the other end over the top. This lets you keep a smaller gap while still getting it on.

3. Rotate into wearing position

Once it’s on, rotate the opening so it sits under the wrist (or wherever it feels most secure and comfortable).
If needed, do a tiny shape adjustment to make it hug the wrist better—but don’t widen the gap you set in Step 1.

4. Take it off the same way (no yanking)

Rotate the opening back toward the narrow side of your wrist.
Slide it off slowly in the reverse path you used to put it on.

Quick rules:

Don’t pull the ends apart every time you wear it.
Slow movement > force.
If it feels like you have to “fight” it, the gap is either too small or you’re trying to pass it over the wrong part of the wrist.